Basket filter is mainly composed of connecting pipe, cylinder, filter basket, flange, flange cover and fasteners. Installed on the pipeline can remove large solid impurities in the fluid, so that the machinery and equipment (including compressors, pumps, etc.) and instruments can work and operate normally, so as to stabilize the process and ensure safe production

T-type filter belongs to the pipeline coarse filter series, which can also be used for the filtration of large particles in gas or other media. Installed on the pipeline, it can remove large solid impurities in the fluid, so that the machinery and equipment (including compressor, pump, etc.) and instruments can work and operate normally, so as to stabilize the process and ensure safe production. When the fluid enters the filter cartridge with a certain specification of filter screen, its impurities are blocked, and the clean filtrate is discharged from the filter outlet. When cleaning is needed, just take out the removable filter cartridge and reload it after treatment. Therefore, it is very convenient for use and maintenanceThe T-type filter produced by our company has the advantages of compact structure, convenient installation and cleaning, large filtering capacity, small pressure loss, wide application range, convenient maintenance, low price, large pollution capacity and so on

Y-type filter is divided into welding and casting, belonging to the pipeline coarse filter series. It can also be used for the filtration of large particles in gas or other media. When installed on the pipeline, it can remove large solid impurities in the fluid, so that the machinery and equipment (including compressor, pump, etc.) and instruments can work and operate normally, so as to stabilize the process and ensure safe production. When the fluid enters the filter cartridge with a certain specification of filter screen, its impurities are blocked, and the clean filtrate is discharged from the filter outlet. When cleaning is needed, just take out the removable filter cartridge and reload it after treatment. Therefore, it is very convenient for use and maintenance The filter produced by our company has the advantages of compact structure, large filtering capacity, small pressure loss, wide application range, convenient maintenance and low price. Its main applicable materials are: 1. Weakly corrosive materials in chemical and petrochemical production, such as water, oil products, ammonia, hydrocarbons, etc 2. Corrosive materials in chemical production, such as caustic soda, soda ash, concentrated and dilute sulfuric acid, carbonic acid, aldehyde acid, etc 3. Low temperature materials in refrigeration, such as liquid methane, liquid ammonia, liquid oxygen and various refrigerants 4. Materials with hygienic requirements in food and pharmaceutical production, such as beer, beverage, dairy products, syrup, etc

The quick opening filter cover is screw compression type with compact structure. It has the advantages of rapid and convenient installation, disassembly, cleaning and inspection. It is suitable for the front of fluid (viscosity < 500mpas) pump and flowmeter

The jacket filter is a double-layer structure, and the interlayer can be filled with steam or heat transfer oil to maintain or increase the fluid temperature, prevent fluid solidification, improve the filtration speed of viscous liquid, or meet the temperature requirements of the next process

The high inlet and low outlet basket filter is mainly composed of connecting pipe, cylinder, filter basket, flange, flange cover and fasteners. Installed on the pipeline can remove large solid impurities in the fluid, so that the machinery and equipment (including compressors, pumps, etc.) and instruments can work and operate normally, so as to stabilize the process and ensure safe production

The product is mainly used as protective filter for filter separator, flowmeter, control valve, etc. In the occasions with serious particle pollution such as refinery finished product warehouse, transfer oil depot and airport oil depot, it is installed in front of the warehousing filter separator (Class A) (used in series) as a pre filter, which can effectively prolong the service life of coalescence filter element; When installed in front of flowmeter and control valve, it can effectively intercept large particle impurities and prevent mechanical damage

Duplex filter is a multi-purpose filtering equipment composed of two stainless steel filters in parallel. It has many advantages, such as novel and reasonable structure, good sealing, strong flow capacity, simple operation and so on. In particular, the side leakage probability of the filter bag is small, which can accurately ensure the filtration accuracy, and can quickly replace the filter bag. There is basically no material consumption for filtration, so as to reduce the operation cost

The exhaust and blowdown filter is equipped with automatic exhaust and blowdown valve, which can be cleaned online during the operation of the filter. The filter can be cleaned without shutting down the system and disassembly. It still keeps continuous operation in the whole cleaning process, which greatly improves the convenience of filter cleaning and regeneration and the working efficiency of the system. The filter is equipped with an automatic exhaust valve developed by our company, so that the gas in the pipeline can be discharged automatically at the filter. Thus, the degree of automation is improved, the labor intensity of workers is reduced, and the expenses of degassing filter are savedThe filter is developed with reference to the engineering construction standard of the Ministry of chemical industry (Hg / tj21637-1991) chemical pipeline filter and the relevant provisions of Sinopec SH / t3411-1999 selection, inspection and acceptance of filters for petrochemical pumps, and in combination with some production practices. The product is widely used for liquid transportation in petrochemical production. It is used to ensure the normal operation of pumps and instruments, filter solid impurities, clean fluid media, improve product purity, and stabilize the process

Lt-s hand operated on-line cleaning filter is composed of cylinder (stainless steel, carbon steel), stainless steel wedge filter screen, corrosion-resistant brush with handle, blowdown valve and pressure gauge. It is a simple and efficient filter. The wedge-shaped filter screen is welded by the wedge-shaped strip stainless steel wire and the vertically arranged support rod to form a continuous and uniform wedge-shaped gap. The filtering accuracy is adjusted by controlling the gap spacing. Compared with ordinary industrial network, it has the advantages of large effective filtering area, good blocking prevention effect, easy cleaning, high strength and longer service life. When the fluid flows through the filter, the impurities are intercepted on the wedge filter screen, and the pressure difference will be generated at the inlet and outlet. When the pressure difference meets the process requirements, it is required to be cleaned. When blowdown is required, it is not necessary to disassemble any parts of the filter. Just open the blowdown valve, turn the blowdown handle on the filter at the same time, and rotate it for 3-5 turns, that is, under the condition of continuous operation without shutdown, the cleaning and blowdown work can be completed in a short time