The filter separator is produced according to the technical indexes of gjb610-88 and gjb689-89 standards, meets the API 1581 Ⅲ standard, and implements the GB150-1998 national pressure vessel standard. The products are divided into three levels: A, B and C. The product breaks through the traditional single filtration mode of the original filter and integrates filtration and dehydration. It can not only filter various small particles in the fuel, but also effectively filter water, fiber and suspended solids in the fuel. It is a very ideal oil purification equipment. At the same time, it is widely applicable to all kinds of fine chemical raw materials to be purified

The filter is produced according to the technical indexes of gjb610-88 and gjb689-89 standards, meets the API 1581 Ⅲ standard, and implements the GB150-1998 national pressure vessel standard. The products are divided into three levels: A, B and C. The product breaks through the traditional single filtration mode of the original filter and integrates filtration and dehydration. It can not only filter various small particles in the fuel, but also effectively filter water, fiber and suspended solids in the fuel. It is a very ideal oil purification equipment. At the same time, it is widely applicable to all kinds of fine chemical raw materials to be purified

Ltqs tank automatic dehydrator is a new generation product developed and designed by our company according to the needs of tank dehydration in petrochemical industry. It is made of stainless steel and has the advantages of reasonable design, simple structure, large drainage, fast oil return speed, strong corrosion resistance, convenient, safe and reliable use. This product is used in petroleum and chemical industries, replacing the manual water cutting mode of oil tank, realizing automatic water cutting, greatly reducing the labor intensity of operation and hydrogen sulfide poisoning during manual water cutting, reducing oil waste and environmental pollution, and meeting the specification requirements of concealed channelization and pipelining of petrochemical system dischargeThe development and application of automatic dehydrator is undoubtedly an important contribution to the improvement of production technology and production automation in petrochemical industry. It solves the problems that the dehydration of oil tank in petrochemical industry adopts manual operation, the separation of oil and water can not be strictly controlled, the oil content of drainage is relatively high, resulting in waste of oil products and environmental pollution; It overcomes the great potential safety hazard caused by human misoperation. The automatic dehydrator of the storage tank is installed at the lower part of the oil tank. The mechanical force generated by buoyancy is used to automatically open and close the drainage. There is no need for manual intervention, no energy consumption and no explosion-proof problem. It not only ensures the safe operation of production, but also reduces the labor intensity of workers and environmental pollution. The utility model has the advantages of wide application range, convenient installation and use, good safety performance and high reliability

Drainage oil blocker is a new patented product jointly developed by our company and Nanchong Refinery Design Institute. It replaces the water seal in oil tank farm. It has the characteristics of compact structure, small volume, simple installation, high technical content, good automatic operation performance and low cost. It is an ideal equipment for drainage oil blocker in oil tank farm at present. Effectively prevent accidents caused by oil leakage in oil tank farm, oil leakage, oil tank rupture or explosion Our company has developed the second generation of oil interceptor and drain valve

The air foam generator is also called the air foam generator. It is a fire-fighting device installed on the tank wall of the top layer of the oil tank to spray foam when the oil tank fires. The thin glass sheet (or diaphragm) of the nozzle is sealed with the air in the tank to prevent the oil or oil gas entering the foam chamber or the fire fighting pipeline. p>

At present, the traditional oil storage tank sends the liquid and adopts the infusion at the bottom of the liquid storage tank, which has certain disadvantages for the oil depot with high requirements for liquid storage quality, frequent transmission and transfer operations and short liquid sedimentation operationsAccordingly, our company has developed a floating liquid outlet device. The floating liquid outlet device is installed in the vertical and horizontal liquid storage tanks. The rotary joint is moved by the buoyancy generated by the pontoon, which can ensure that the liquid outlet and suction port of the liquid outlet device float up and down with the liquid level in the storage tank, keep pumping the clean liquid in the high liquid level part of the storage tank, and the water and impurities deposited in the liquid layer at the bottom of the storage tank will not be entrained out of the storage tank, So as to ensure the quality of the issued liquid

Lthq oil mixer is a special equipment for petrochemical liquid blending jointly developed by our company and Baling Petrochemical Design InstituteIt is installed at the top, middle, side walls and bottom of the tank. (as shown below)